KnuKonceptz Dual Battery, Dual 1/0 Gauge 2 Way Fuse Distribution Block

Description

Ebay Product Page
Store
About Us
Frequently Asked Questions
Policies
Shipping
Store Home
Amp Kits
Close Outs
Component Video Cables
Digital / Optical Cables
Distribution / Fuse Blocks
DVI & HDMI Cables
Fuses
Power Wire
RCA Cables
Speaker Wire
Subwoofer Cables
S-Video Cables
Terminals
Dual Battery 2 Way Fused Power Distribution
The KNF36 is a two way fused power distribution block, with a center pass through port for direct connection of a second, trunk mounted battery.
Accepting 0 gauge input and providing one 0 gauge and/or one 4 gauge output for power. Included with this block are your choice if two fused outputs. Your amp has dual inputs? That is perfect for the KNF36.
Its also a two way fuse block with 4 outputs!!
With this pass through design, multiple blocks can be linked endlessly.
There are three main configurations for the KNF-36
2 Way Fuse Block with single outputs per circuit.
2 Way Fuse Block with dual outputs per circuit.
6 Way Ground Distribution
The KNF36 uses 3 isolated sections in its
patent pending
design. Each is then linked or fused to configure the block for your application's demands. Each output is supplied as two links or two Mini-ANL fuses allowing up to 300A of protection per circuit!
Each port on the KNF36 is capable of accepting 0 gauge or 4 gauge power cable depending on the fitting used. Now power for the largest installations can be easily be routed through one block!
Available output sizes - 40A / 60A / 80A / 100A / 120A / 160A / 200A / 240A
(select two, note choice with payment - 1- 60A and 1- 120A output will be sent if NO OPTION LISTED)
Outputs are supplied as 2 fuses or links per selection, a 160A selection will be supplied as 2- 80A fuses.
Overview
- KNF Series Fuse / Distribution Blocks use our compression fittings to secure the input and output cable connections. By changing the fitting type, the installer can select from 1/0 or 4 gauge input or output. This same block is capable of converting into a 6 way ground block too. Just use our Mini-ANL links and the KNF36 turns into a full system ground block
Notes
-
The KNF36 is a two way block with many mounting configurations. Please follow our schematics closely when installing. From the factory, you can connect three0 gauge cables and three 4 gauge cables. Additional fittings are {{detail_product_description}}.99 and can be purchased to make this block a 6 way 0 gauge distribution block.
KonFUSED System Introduction
Specifications
Dimensions L x W x H:
2.8" x 4.6" x 1.85"
Total Ports:
6
Fittings Included:
Three 0 Gauge, Three 4 Gauge
Fuse Type:
Mini-ANL (AFC)
Fuse Count:
4 fuses come with the KNF36
Max Load:
240A x 2
Finish:
Black Chrome
Product FAQ
How do the Kompression Terminals Work?
Strip the jacket off the cable; Insert the wire into the fitting; fold the copper strands as shown in the photo; Tighten the fitting into the block, compressing the cable into place. This results in 360 degrees of contact area, unlike set screw blocks that have just the one high pressure point. The Kompression Fitting allows more strand/block interaction, which results in less resistance and more current flow.
KonFUSED System Introduction
How can I connect 2 Gauge wire with these terminals?
The 0 Gauge fitting can be used with a 2 gauge cable as well
Can I purchase additional fittings for this model?
Yes, additional fittings are available for purchase under our installation accessories page. They are {{detail_product_description}}.99 each
Additional Images