-40%
2 for GMC Sierra Yukon 2003 2004 2005 2006 Keyless Remote Car Key Fob
$ 4.74
- Description
- Size Guide
Description
2 for GMC Sierra Yukon 2003 2004 2005 2006 Keyless Remote Car Key FobItem Description:
【ITEM SPECIFICATION 】
1.Packing list:2x key fob with electronics and a battery
2.Condition: New, never used replacement part
3.Replaces P/N:21997127
4.For FCC ID: LHJ011
5.For IC/Other:10377295, 10377295, 15132197, 15132198, 15186200, 15186201, 15186203, 15186209, 22730827
6.Programming:Self programmable with one working key.
【VEHICLES COMPATIBILITY】
fit for 2003-2006 Cadillac Escalade
fit for 2003-2006 Chevrolet Avalanche 1500 2500
fit for 2003-2007 Chevrolet Silverado 1500 2500 3500 - 2007 year Classic only
fit for 2003-2006 Chevrolet Suburban 1500 2500
fit for 2003-2006 Chevrolet Tahoe
fit for 2003-2007 GMC Sierra 1500 2500 3500 - 2007 year Classic only
fit for 2003-2006 GMC Yukon - All Trims
fit for 2003-2006 Hummer H2
fit for 2004-2007 Saturn Vue
【PROGRAMMING STEPS】
For all models except Chevrolet Equinox, Chevrolet SSR, Pontiac Torrent
1. Enter the vehicle, close, and unlock all doors using the power unlock switch on the driver’s door. Insert the key into the ignition but do not turn it yet.
2. Using the power unlock switch on the driver’s door, press and hold the switch in the unlock position.
3. While holding the switch in the unlock position, switch the key as far ON as it will go without starting the vehicle and back to OFF two times, ending in the OFF position, then release the power unlock switch.
At this point the vehicle door locks should automatically lock and unlock, indicating that the programming mode has been activated. If the door locks do not cycle automatically then the programming procedure has failed and you need to restart the procedure from STEP 1.
4. Using any remote (we recommend first programming original remotes if you have one), press and hold down the “UNLOCK” and “LOCK” buttons simultaneously (at the same time) for up to 30 seconds until the door locks automatically lock and unlock. If 30 seconds pass while holding down the buttons and the vehicle door locks do not cycle, then the remote programming has failed and you must restart the programming from STEP 1.
5. Repeat STEP 4 for all remaining remotes you wish to program. You can program up to four remotes total.
CAUTION :
Please make sure to read through the programming instructions completely before attempting.
If the programming fails, you need to go to the locksmith to format,there will be an extra cost.
Two keys cannot be programmed at the same time, you can program one first, and then operate the other program after normal use.
【BEFOR PROGRAMMING】
●All remotes that are expected to work for the vehicle will need to be with you in the vehicle before attempting the programming.
●Any remotes not present at the time of programming will cease to function until reprogrammed.
More Display:
On Jun-28-21 at 00:10:59 PDT, seller added the following information: